Deutsches Kaiserreich, H2/1902

[miketr]

1) Build seven IC in Elsaß-Lothringen, Hesse-Nassau, K.Saxony, Brandenburg, Silesia, Westphalia and Tirol
1a) Start the Berlin to Tehran Railroad to complete in 1907.  Story to follow.
2) Three free IC placed in Rhineland, Bavaria and Lower Austria
3) Upgrade Cav Korps from 1880 to 1895 tech and build a new 1895 tech infantry Korps.  (I will be building one of these a turn for a bit).
4) Lay down two more 1900 PDNs and build five more TBs.
5) 4 Cruisers of the Venezuela Blockade Squadron placed on mobilized status.
6) Started Aircraft 1902 research and started to research following guns 105mm L50, 150mm L50, 210mm L50 and 280mm L50   

[miketr]

I just discovered an error in my report, I list Kustenland with its .44 pop which went to Italy but not Burgenland with its .20 pop annexed from Hungary.  I will correct this next report apply a $0.5 penalty to the 1903 H1 budget. 

Michael

[Jefgte]

...105mm L50, 150mm L50, 210mm L50 and 280mm L50

Seeing Naval Weapons:

http://www.navweaps.com/Weapons/WNGER_Main.htm

That's perhaps too early to have L50.

Jef

[miketr]

Jefgte,

The rules appear to allow it as I understand the gunnery table that's here, I just finished the 1900 naval artillery tech.  I have no objection to changing if I am in error.

http://www.navalism.org/index.php/topic,6440.0.html

Would one of our mods speak up?

Michael

[Walter]

Yes, the gun tech research rules allow for the 105mm L50, 150mm L50 and 210mm L50 guns but you need the 1905 tech for a 280mm L50 gun.

[snip]

Yes, the gun tech research rules allow for the 105mm L50, 150mm L50 and 210mm L50 guns but you need the 1905 tech for a 280mm L50 gun.

Correct. The previous version of the table had 11" and 12" seperated. We removed that distinction because we felt that it was somewhat ahistorical.

[miketr]

OK the 280 R&D is illegal but the others are legall, maybe I was looking at an old version of the chart on my PC or something.  I will replace the 280mm with 240mm as that would fall into the under 10" range.

Thanks everyone for checking of my stuff and catching errors.

Michael